Adjusting Spray HEads
Variable Adjustment Nozzles
To set an adjustable spray nozzle: While the head is under pressure, grip just under the top of the nozzle and twist the grooved adjustment to the desired pattern. Only one side will adjust. To set the fixed side of the arc pattern, grip the stem of the head and twist.
Fixed Arc Nozzles
To set a nonadjustable spray head: While the head is under pressure, grip the head and twist until the area is covered as desired. If the head is watering outside of the beds or onto concrete areas, variable nozzles or different radius nozzles might be needed.
MPR Nozzles
To set MPR Nozzles: While the head is under pressure, grip the silver ring just under the top of the nozzle and rotate to the desired arc pattern. Only one side will adjust. To set the fixed side of the arc pattern, grip the stem of the head and twist.